Certified Technician (RSTECH)
E-Learning Training
Bearbeitungsdauer ca. 30 Stunden
180 Tage Freischaltung
Supporting Cisco Routing and Switching Network Devices v3.0 (100-490) RSTECH (100-490)
The Cisco Certified Technician Supporting Cisco Routing and Switching Network Devices (RSTECH) v3.0 course focuses on the skills required for onsite support and maintenance of Cisco routers, switches, and operating environments. This will help Field Engineers identify Cisco router and switch models, accessories, cabling, and interfaces; understand the Cisco IOS software operating modes and identify commonly found software. The engineer will also be able to use the CLI to connect and service products.
The RSTECH exam is required for Cisco CCT Routing & Switching certification. This exam tests a candidate's knowledge of the skills required to perform onsite support and maintenance of Cisco routers, switches, and operating software. The exam also tests a candidate's ability to work effectively with the Cisco Technical Assistance Center (TAC).
This course will help you:
- Increase your competency in network fundamentals, configure remote servers, troubleshoot basic Layer 1 and basic Layer 2, and recognize connection end points
- Gain confidence in managing Cisco devices and systems
- Prepare for the 100-490 RSTECH exam, which earns the Cisco Certified Technician Routing and Switching certification
Associated Certification: CCT Routing and Switching
Associated Exam: 100-490 RSTECH
| Event Date | 25-09-2023 |
| Event End Date | 29-09-2023 |
| Individual Price | 375.00 |
| Bearbeitungsdauer ca. 30 Stunden. 180 Tage Freischaltung (ELT) | |
| Training Location | IPnetON GmbH, Berlin / Onsite |
| Examen | Pearson Vue Examen 100-490 |
| Preis | 125,-€ (exkl. MwSt.) |
| zzgl. Bearbeitungsgebühr | 20,-€ |
E-Learning Training
Bearbeitungsdauer ca. 30 Stunden
180 Tage Freischaltung
Supporting Cisco Routing and Switching Network Devices v3.0 (100-490) RSTECH (100-490)
The Cisco Certified Technician Supporting Cisco Routing and Switching Network Devices (RSTECH) v3.0 course focuses on the skills required for onsite support and maintenance of Cisco routers, switches, and operating environments. This will help Field Engineers identify Cisco router and switch models, accessories, cabling, and interfaces; understand the Cisco IOS software operating modes and identify commonly found software. The engineer will also be able to use the CLI to connect and service products.
The RSTECH exam is required for Cisco CCT Routing & Switching certification. This exam tests a candidate's knowledge of the skills required to perform onsite support and maintenance of Cisco routers, switches, and operating software. The exam also tests a candidate's ability to work effectively with the Cisco Technical Assistance Center (TAC).
This course will help you:
- Increase your competency in network fundamentals, configure remote servers, troubleshoot basic Layer 1 and basic Layer 2, and recognize connection end points
- Gain confidence in managing Cisco devices and systems
- Prepare for the 100-490 RSTECH exam, which earns the Cisco Certified Technician Routing and Switching certification
Associated Certification: CCT Routing and Switching
Associated Exam: 100-490 RSTECH
| Event Date | 09-10-2023 |
| Event End Date | 13-10-2023 |
| Individual Price | 375.00 |
| Bearbeitungsdauer ca. 30 Stunden. 180 Tage Freischaltung (ELT) | |
| Training Location | IPnetON GmbH, Berlin / Onsite |
| Examen | Pearson Vue Examen 100-490 |
| Preis | 125,-€ (exkl. MwSt.) |
| zzgl. Bearbeitungsgebühr | 20,-€ |
E-Learning Training
Bearbeitungsdauer ca. 30 Stunden
180 Tage Freischaltung
Supporting Cisco Routing and Switching Network Devices v3.0 (100-490) RSTECH (100-490)
The Cisco Certified Technician Supporting Cisco Routing and Switching Network Devices (RSTECH) v3.0 course focuses on the skills required for onsite support and maintenance of Cisco routers, switches, and operating environments. This will help Field Engineers identify Cisco router and switch models, accessories, cabling, and interfaces; understand the Cisco IOS software operating modes and identify commonly found software. The engineer will also be able to use the CLI to connect and service products.
The RSTECH exam is required for Cisco CCT Routing & Switching certification. This exam tests a candidate's knowledge of the skills required to perform onsite support and maintenance of Cisco routers, switches, and operating software. The exam also tests a candidate's ability to work effectively with the Cisco Technical Assistance Center (TAC).
This course will help you:
- Increase your competency in network fundamentals, configure remote servers, troubleshoot basic Layer 1 and basic Layer 2, and recognize connection end points
- Gain confidence in managing Cisco devices and systems
- Prepare for the 100-490 RSTECH exam, which earns the Cisco Certified Technician Routing and Switching certification
Associated Certification: CCT Routing and Switching
Associated Exam: 100-490 RSTECH
| Event Date | 16-10-2023 |
| Event End Date | 20-10-2023 |
| Individual Price | 375.00 |
| Bearbeitungsdauer ca. 30 Stunden. 180 Tage Freischaltung (ELT) | |
| Training Location | IPnetON GmbH, Berlin / Onsite |
| Examen | Pearson Vue Examen 100-490 |
| Preis | 125,-€ (exkl. MwSt.) |
| zzgl. Bearbeitungsgebühr | 20,-€ |
E-Learning Training
Bearbeitungsdauer ca. 30 Stunden
180 Tage Freischaltung
Supporting Cisco Routing and Switching Network Devices v3.0 (100-490) RSTECH (100-490)
The Cisco Certified Technician Supporting Cisco Routing and Switching Network Devices (RSTECH) v3.0 course focuses on the skills required for onsite support and maintenance of Cisco routers, switches, and operating environments. This will help Field Engineers identify Cisco router and switch models, accessories, cabling, and interfaces; understand the Cisco IOS software operating modes and identify commonly found software. The engineer will also be able to use the CLI to connect and service products.
The RSTECH exam is required for Cisco CCT Routing & Switching certification. This exam tests a candidate's knowledge of the skills required to perform onsite support and maintenance of Cisco routers, switches, and operating software. The exam also tests a candidate's ability to work effectively with the Cisco Technical Assistance Center (TAC).
This course will help you:
- Increase your competency in network fundamentals, configure remote servers, troubleshoot basic Layer 1 and basic Layer 2, and recognize connection end points
- Gain confidence in managing Cisco devices and systems
- Prepare for the 100-490 RSTECH exam, which earns the Cisco Certified Technician Routing and Switching certification
Associated Certification: CCT Routing and Switching
Associated Exam: 100-490 RSTECH
| Event Date | 23-10-2023 |
| Event End Date | 27-10-2023 |
| Individual Price | 375.00 |
| Bearbeitungsdauer ca. 30 Stunden. 180 Tage Freischaltung (ELT) | |
| Training Location | IPnetON GmbH, Berlin / Onsite |
| Examen | Pearson Vue Examen 100-490 |
| Preis | 125,-€ (exkl. MwSt.) |
| zzgl. Bearbeitungsgebühr | 20,-€ |
E-Learning Training
Bearbeitungsdauer ca. 30 Stunden
180 Tage Freischaltung
Supporting Cisco Routing and Switching Network Devices v3.0 (100-490) RSTECH (100-490)
The Cisco Certified Technician Supporting Cisco Routing and Switching Network Devices (RSTECH) v3.0 course focuses on the skills required for onsite support and maintenance of Cisco routers, switches, and operating environments. This will help Field Engineers identify Cisco router and switch models, accessories, cabling, and interfaces; understand the Cisco IOS software operating modes and identify commonly found software. The engineer will also be able to use the CLI to connect and service products.
The RSTECH exam is required for Cisco CCT Routing & Switching certification. This exam tests a candidate's knowledge of the skills required to perform onsite support and maintenance of Cisco routers, switches, and operating software. The exam also tests a candidate's ability to work effectively with the Cisco Technical Assistance Center (TAC).
This course will help you:
- Increase your competency in network fundamentals, configure remote servers, troubleshoot basic Layer 1 and basic Layer 2, and recognize connection end points
- Gain confidence in managing Cisco devices and systems
- Prepare for the 100-490 RSTECH exam, which earns the Cisco Certified Technician Routing and Switching certification
Associated Certification: CCT Routing and Switching
Associated Exam: 100-490 RSTECH
| Event Date | 30-10-2023 |
| Event End Date | 03-11-2023 |
| Individual Price | 375.00 |
| Bearbeitungsdauer ca. 30 Stunden. 180 Tage Freischaltung (ELT) | |
| Training Location | IPnetON GmbH, Berlin / Onsite |
| Examen | Pearson Vue Examen 100-490 |
| Preis | 125,-€ (exkl. MwSt.) |
| zzgl. Bearbeitungsgebühr | 20,-€ |
E-Learning Training
Bearbeitungsdauer ca. 30 Stunden
180 Tage Freischaltung
Supporting Cisco Routing and Switching Network Devices v3.0 (100-490) RSTECH (100-490)
The Cisco Certified Technician Supporting Cisco Routing and Switching Network Devices (RSTECH) v3.0 course focuses on the skills required for onsite support and maintenance of Cisco routers, switches, and operating environments. This will help Field Engineers identify Cisco router and switch models, accessories, cabling, and interfaces; understand the Cisco IOS software operating modes and identify commonly found software. The engineer will also be able to use the CLI to connect and service products.
The RSTECH exam is required for Cisco CCT Routing & Switching certification. This exam tests a candidate's knowledge of the skills required to perform onsite support and maintenance of Cisco routers, switches, and operating software. The exam also tests a candidate's ability to work effectively with the Cisco Technical Assistance Center (TAC).
This course will help you:
- Increase your competency in network fundamentals, configure remote servers, troubleshoot basic Layer 1 and basic Layer 2, and recognize connection end points
- Gain confidence in managing Cisco devices and systems
- Prepare for the 100-490 RSTECH exam, which earns the Cisco Certified Technician Routing and Switching certification
Associated Certification: CCT Routing and Switching
Associated Exam: 100-490 RSTECH
| Event Date | 06-11-2023 |
| Event End Date | 10-11-2023 |
| Individual Price | 375.00 |
| Bearbeitungsdauer ca. 30 Stunden. 180 Tage Freischaltung (ELT) | |
| Training Location | IPnetON GmbH, Berlin / Onsite |
| Examen | Pearson Vue Examen 100-490 |
| Preis | 125,-€ (exkl. MwSt.) |
| zzgl. Bearbeitungsgebühr | 20,-€ |
E-Learning Training
Bearbeitungsdauer ca. 30 Stunden
180 Tage Freischaltung
Supporting Cisco Routing and Switching Network Devices v3.0 (100-490) RSTECH (100-490)
The Cisco Certified Technician Supporting Cisco Routing and Switching Network Devices (RSTECH) v3.0 course focuses on the skills required for onsite support and maintenance of Cisco routers, switches, and operating environments. This will help Field Engineers identify Cisco router and switch models, accessories, cabling, and interfaces; understand the Cisco IOS software operating modes and identify commonly found software. The engineer will also be able to use the CLI to connect and service products.
The RSTECH exam is required for Cisco CCT Routing & Switching certification. This exam tests a candidate's knowledge of the skills required to perform onsite support and maintenance of Cisco routers, switches, and operating software. The exam also tests a candidate's ability to work effectively with the Cisco Technical Assistance Center (TAC).
This course will help you:
- Increase your competency in network fundamentals, configure remote servers, troubleshoot basic Layer 1 and basic Layer 2, and recognize connection end points
- Gain confidence in managing Cisco devices and systems
- Prepare for the 100-490 RSTECH exam, which earns the Cisco Certified Technician Routing and Switching certification
Associated Certification: CCT Routing and Switching
Associated Exam: 100-490 RSTECH
| Event Date | 13-11-2023 |
| Event End Date | 17-11-2023 |
| Individual Price | 375.00 |
| Bearbeitungsdauer ca. 30 Stunden. 180 Tage Freischaltung (ELT) | |
| Training Location | IPnetON GmbH, Berlin / Onsite |
| Examen | Pearson Vue Examen 100-490 |
| Preis | 125,-€ (exkl. MwSt.) |
| zzgl. Bearbeitungsgebühr | 20,-€ |
E-Learning Training
Bearbeitungsdauer ca. 30 Stunden
180 Tage Freischaltung
Supporting Cisco Routing and Switching Network Devices v3.0 (100-490) RSTECH (100-490)
The Cisco Certified Technician Supporting Cisco Routing and Switching Network Devices (RSTECH) v3.0 course focuses on the skills required for onsite support and maintenance of Cisco routers, switches, and operating environments. This will help Field Engineers identify Cisco router and switch models, accessories, cabling, and interfaces; understand the Cisco IOS software operating modes and identify commonly found software. The engineer will also be able to use the CLI to connect and service products.
The RSTECH exam is required for Cisco CCT Routing & Switching certification. This exam tests a candidate's knowledge of the skills required to perform onsite support and maintenance of Cisco routers, switches, and operating software. The exam also tests a candidate's ability to work effectively with the Cisco Technical Assistance Center (TAC).
This course will help you:
- Increase your competency in network fundamentals, configure remote servers, troubleshoot basic Layer 1 and basic Layer 2, and recognize connection end points
- Gain confidence in managing Cisco devices and systems
- Prepare for the 100-490 RSTECH exam, which earns the Cisco Certified Technician Routing and Switching certification
Associated Certification: CCT Routing and Switching
Associated Exam: 100-490 RSTECH
| Event Date | 20-11-2023 |
| Event End Date | 24-11-2023 |
| Individual Price | 375.00 |
| Bearbeitungsdauer ca. 30 Stunden. 180 Tage Freischaltung (ELT) | |
| Training Location | IPnetON GmbH, Berlin / Onsite |
| Examen | Pearson Vue Examen 100-490 |
| Preis | 125,-€ (exkl. MwSt.) |
| zzgl. Bearbeitungsgebühr | 20,-€ |
E-Learning Training
Bearbeitungsdauer ca. 30 Stunden
180 Tage Freischaltung
Supporting Cisco Routing and Switching Network Devices v3.0 (100-490) RSTECH (100-490)
The Cisco Certified Technician Supporting Cisco Routing and Switching Network Devices (RSTECH) v3.0 course focuses on the skills required for onsite support and maintenance of Cisco routers, switches, and operating environments. This will help Field Engineers identify Cisco router and switch models, accessories, cabling, and interfaces; understand the Cisco IOS software operating modes and identify commonly found software. The engineer will also be able to use the CLI to connect and service products.
The RSTECH exam is required for Cisco CCT Routing & Switching certification. This exam tests a candidate's knowledge of the skills required to perform onsite support and maintenance of Cisco routers, switches, and operating software. The exam also tests a candidate's ability to work effectively with the Cisco Technical Assistance Center (TAC).
This course will help you:
- Increase your competency in network fundamentals, configure remote servers, troubleshoot basic Layer 1 and basic Layer 2, and recognize connection end points
- Gain confidence in managing Cisco devices and systems
- Prepare for the 100-490 RSTECH exam, which earns the Cisco Certified Technician Routing and Switching certification
Associated Certification: CCT Routing and Switching
Associated Exam: 100-490 RSTECH
| Event Date | 27-11-2023 |
| Event End Date | 01-12-2023 |
| Individual Price | 375.00 |
| Bearbeitungsdauer ca. 30 Stunden. 180 Tage Freischaltung (ELT) | |
| Training Location | IPnetON GmbH, Berlin / Onsite |
| Examen | Pearson Vue Examen 100-490 |
| Preis | 125,-€ (exkl. MwSt.) |
| zzgl. Bearbeitungsgebühr | 20,-€ |
E-Learning Training
Bearbeitungsdauer ca. 30 Stunden
180 Tage Freischaltung
Supporting Cisco Routing and Switching Network Devices v3.0 (100-490) RSTECH (100-490)
The Cisco Certified Technician Supporting Cisco Routing and Switching Network Devices (RSTECH) v3.0 course focuses on the skills required for onsite support and maintenance of Cisco routers, switches, and operating environments. This will help Field Engineers identify Cisco router and switch models, accessories, cabling, and interfaces; understand the Cisco IOS software operating modes and identify commonly found software. The engineer will also be able to use the CLI to connect and service products.
The RSTECH exam is required for Cisco CCT Routing & Switching certification. This exam tests a candidate's knowledge of the skills required to perform onsite support and maintenance of Cisco routers, switches, and operating software. The exam also tests a candidate's ability to work effectively with the Cisco Technical Assistance Center (TAC).
This course will help you:
- Increase your competency in network fundamentals, configure remote servers, troubleshoot basic Layer 1 and basic Layer 2, and recognize connection end points
- Gain confidence in managing Cisco devices and systems
- Prepare for the 100-490 RSTECH exam, which earns the Cisco Certified Technician Routing and Switching certification
Associated Certification: CCT Routing and Switching
Associated Exam: 100-490 RSTECH
| Event Date | 04-12-2023 |
| Event End Date | 08-12-2023 |
| Individual Price | 375.00 |
| Bearbeitungsdauer ca. 30 Stunden. 180 Tage Freischaltung (ELT) | |
| Training Location | IPnetON GmbH, Berlin / Onsite |
| Examen | Pearson Vue Examen 100-490 |
| Preis | 125,-€ (exkl. MwSt.) |
| zzgl. Bearbeitungsgebühr | 20,-€ |
